A corner apartment can be found in the end of the construction: this is, part of its walls aren’t adjacent to the interiors, however are the outer partitions of the home.
There can be one apartment at a corner apartment – it occupies the whole end of the home, it is also called a corner apartment. Or 2 – the windows of a single overlook the road, the second – the lawn. Is based on the building program, the layout of the assumptions.
There is also a »different caste » – housing with walls from the expansion joints. These »gaps » between entrances are normally made in multi-story structures, the principal task of the created unit – to split the deformation forces throughout the shrinkage of the building, in the event of emergencies. Pros and cons of both corner apartments at the joint are slightly different from the typical ones using this road – we’ll pay special attention to this topic in the past section.
Infection
Since the 2-3 sides of this room is outdoors, in winter it’s 3-5C colder, and in summer on the contrary – hotter. Especially if the end of the home is heated by sunlight. Sometimes, the gap reaches 10C – however such a distinction is unacceptable, indicates a problem with the exterior of the house – most probably have to get in touch with the management firm, requesting (or forcing) to fulfill their immediate duties, to patch the cracks formed.
Corner flat in a brick home with thick walls is more comfy. Such risks are not subjected – the depth of the wall acts as a buffer, so not letting overheating, overcooling.
Humidity
When a room has only one wall combined with the street, it generally has sufficient space heat to prevent freezing and condensation. But when there are two outdoor partitions, and they are adjacent – there is a high probability of freezing at the corner, the creation of condensation in it, and consequently – mold, domikday.ru fungus. Their spores not only spoil the overall look of the room, but also cause the look, complication of several serious diseases.
Important! The problems of corner location are compounded when the variables are related – too low temperatures from heating batteries along with dampness is sure to cause moldy walls.